Description:
A new universal 5 bolt hole sending unit for use with most 1965-1997 GM fuel gauges. The OHM rating of this sending unit is 0 OHM-90 OHM (0 OHM is empty and 90 OHM is full) and comes with 5 special O-ring bolts and a mounting gasket.
****This sending unit will not work with 1964 and older GM Gauges.****
This sending unit mounts with 5 mounting screws and it works on fuel tanks from 6-24 inches deep by cutting to length using the instructions provided. Since fuel tank senders are only read resistance to ground, they work on all 6-24 volt systems (positive or negative ground). They do not have a fuel pickup tube built into them lik some original senders may. This sending unit is made with a high quality ceramic board rheostat.
There are always exceptions. Please check double check your ohm rating before ordering. The resistance of your fuel sender should match that of your gauge. We do have other sending units available. The following list is for stock gauges and some popular aftermarket brands:
- Ford up to 1986 - 73-10 Ohms
- Ford 1987 & up - 16-158 Ohms
- GM up to 1964 - 0-30 Ohms
- GM 1965-1997 - 0-90 Ohms
- GM 1998 & up - 40-250 Ohms
- Mopar up to 1986 - 73-10 Ohms
- AMC 1950-1977 - 73-10 Ohms
- Autometer -240-33 Ohms is the most common however other ohm ranges are made
- Classic Instruments - 240-33 Ohms (excluding vehicle specific gauge kits which use factory ohm range)
- Dolphin - 0-90 Ohms
- Dakota Digital - Programmable to work with most Ohm range senders
- VDO - 10-180 Ohms
|